This is the Internet version of the user's guide. © Print only for private use.
28
Calling
• You held the phone too far away – hold it as you
do during a call.
• The voice command was too short – it should
be around one second long and more than one
syllable.
• You spoke too late or too soon – speak
immediately after the tone.
• You did not record the voice command when the
handsfree was attached – for voice control with
a handsfree kit, record when the handsfree is
attached.
• You used another intonation – use the same
intonation as in the recorded voice command.
Diverting calls
If you cannot answer incoming calls, you can
divert them to another number, for example, your
answering service.
You can choose between the following divert
options:
•
– divert all calls.
•
– divert calls if you are already
on the phone.
•
– divert calls if your phone is
turned off or if you are unreachable.
•
– divert calls that you do not answer
within a specified time limit (operator-dependent).
To activate a call divert
1
}
}
the
tab
}
2
Select a call type and then one of the divert
options
}
3
Enter the phone number to which you want
your calls to be diverted, or
}
to find
the contact in your phonebook
}
To deactivate a call divert
Scroll to the divert option
}
.
To check all divert options
}
}
tab
}
}
More than one call
You can handle more than one call simultaneously.
For example, you can put an ongoing call on hold,
while you make or answer a second call, and then
switch between the two calls.
When the Restrict calls function is activated, some
Divert calls options are not available.