63
More Features
To add a code
1
2
Enter a passcode and select
3
Scroll to
4
Enter a name associated with the
code and select
5
To change a passcode
1
2
Enter your passcode and select
>
.
3
Enter your new passcode and select
4
Re-enter the new passcode and select
5
Forget your passcode?
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are
deleted. The next time you enter
the code memo, you must proceed as
if you are opening it for the first time.
See
To open code memo for the first
on page 62.
To reset code memo
1
From standby select
>
2
Enter any passcode to access the
code memo. The checkword and
codes that are then shown are
incorrect.
3
Select
4
appears.
5
Select
.
Profiles
Profiles automatically adapt some
phone settings to different situations,
for example, the ring volume may
be adapted to suit a meeting or an
accessory. You can reset all profiles
to how they were set when you
purchased your cell phone.
To select a profile
1
From standby select
> the
2
Select a profile.
To view and edit a profile
1
From standby select
> the
2
Scroll to a profile and select
>
.
You cannot rename the Normal profile.
This is the Internet version of the User's guide. © Print only for private use.