Tel: +44 (0)1732 861200 - E-mail: [email protected] - Web: www.sontay.com
© 2017 Sontay Limited. All rights reserved
Page 1 of 4
RE-1P-7
1-Phase Din-Rail Mount 7kW
Issue Number: 7.1
Date of Issue: 28/04/2020
Four Elms Road
Edenbridge
Kent
TN8 6AB
UK
Features & Benefits
Selectable control input
Over temperature protection with auto reset
Line powered
Efficient electronic switching
No additional heat sinks or RFI filters required
Technical Overview
The 7kW single phase DIN Rail mounting controller is suitable for providing control of electric heating loads from an analogue signal. Applications include
electric heating coils, heating cables and electric furnaces.
The units utilise solid-state switching with “zero crossing technology” to provide accurate switching control. All items are provided with an alarm output for
over temperature protection and LED Indication of Output ON, and are designed to mount on DIN rail.
Specification
Input signal
Selectable
0-10V, 0-5V, 2-10V or 4-20mA
Supply (load)
220-255Vac 50/60Hz
Max. load
30A
Dissipated heat
35W
Terminal connections
Rising cage
Over temperature:
Trip in temp.
@ 90°C
Trip out temp.
@ 85°C
LED indication
ON when output is on
Alarm output
(as power supply) 0V when over temp
alarm is active
Ambient temperature
0-45°C without de-rating *
Dimensions (W, H, D)
165 x 105 x 80mm
Conformity
CE Marked
Country of origin
UK
* Units are rated at 45°C. If using at higher ambient temp, de-rate the
units by 10% for every 5°C above 45°C
The products referred to in this data sheet meet the requirements of EU
2014/30/EU and 2014/35/EU
Product Codes
RE-1P-7
7kW, 30A, Single-phase Din-rail Mount Heating
Regulator
WEEE Directive:
At the end of the products useful life please dispose as
per the local regulations.
Do not dispose of with normal household waste.
Do not burn.
