6
7
Pairing the Easy Line Remote Control with your
hearing aids
To use your Remote Control with your hearing aids,
you must first pair the hearing aids.
It is only necessary to perform the pairing
procedure once with your hearing aids. After the
initial pairing, your Remote Control will connect
automatically with your hearing aids.
The Remote Control will be automatically in the
pairing mode if switched on for the first time. This
is indicated by the blinking blue light indicator on
your Remote Control.
Set your hearing aids into the pairing mode by
switching them on. You now have 3 minutes to pair
your Easy Line Remote Control with your hearing aids.
1. Press and hold the volume
up “+” button
2. Switch on your Remote Control
while still pressing the
volume up “+” button
3. Release the volume up ”+” button
when the light indicator starts
to blink blue
4. The Remote Control and your hearing aids
will now pair automatically
5. After a successful pairing the light indicator is
solid green for 5 seconds and you may hear a
notification beep in your hearing aid
6. You can now use your Remote Control
Changing hearing aid volume
1
2
Press “+” to increase volume
Press “–” to decrease volume
