40 |
EN
8. Operation
Event
Switch on machine
Switch off machine
Switch on heater
Switch off heater
Start ultrasonic cleaning
(normal mode =
continuous sweep)
Start ultrasonic cleaning
(Degas mode)
Trigger
Press on / off button
Press on / off button
Set rotary switch for heater
to desired value
Turn rotary switch for heater
until no LED on the heating LED bar
is lit continuously
Set cleaning time rotary switch
to desired time value
AND
Press START / STOP button briefly
Set rotary switch for cleaning time to desired time
value
AND
Press Degas / Boost button briefly until the mode is
reached
AND
Press START / STOP button briefly
OR
if ultrasound is already on, the Boost mode can also be
changed to (or exited again) during running ultrasound
operation by pressing
the Degas / Boost button
Response
Machine operational
on / off LED lights green continuously
All LEDs off
Heater on
Heater LED bar: lights = SETPOINT temperature
Heater LED bar: flashes = ACTUAL temperature
(if bath temperature ≥ 30 °C)
Heater off
Heater LED bar: no LED is lit continuously
Heater LED bar: flashes = ACTUAL temperature
(if bath temperature ≥ 30 °C)
Ultrasound in operation for the set time in normal mode
Machine LED: lights continuously
Start / Stop Ultrasound LED: lights
Degas / Boost LED: off
Time LED bar: SETPOINT time lights
Time LED bar: remaining running time flashes
Ultrasound in operation for the set time in Degas mode
Machine LED: lights continuously
Start / Stop Ultrasound LED: lights
Degas / Boost LED: flashes.
Time LED bar: SETPOINT time lights
Time LED bar: remaining running time flashes
SONOSWISS_GebrauchsanleitungD-E-FR-IT-ES_ARIAL_P.indd 40
16.10.18 08:02
