4
Connecting the remote control
To wake from power save mode
Press
a
button,
or
speak
a
voice
command.
Connecting the remote
control
You
can
connect
the
remote
control
either
by
USB
cable
or
wirelessly
by
Bluetooth
technology.
When
the
system
is
connected,
the
USB
indicator
or
Bluetooth
indicator
is
on,
and
the
remote
‐
control
icon
appears
on
the
ultrasound
image.
Connecting by USB cable
To connect by USB cable
1
Turn
on
the
ultrasound
system
and
remote
control.
(See
“Turning
on
power
and
charging
the
battery”
on
page 3.)
2
Connect
the
smaller
end
of
the
USB
cable
to
the
USB
port
on
the
remote
control.
(See
“remote
control”
on
page 2
for
location
of
the
USB
port.)
3
Allowing
slack
in
the
USB
cable,
connect
the
other
end
of
the
USB
cable
to
a
USB
port
on
the
ultrasound
system.
Connecting by Bluetooth technology
You
connect
by
Bluetooth
technology
through
the
ultrasound
system’s
USB Devices
setup
page.
Only
one
system
can
connect
to
the
remote
control
at
a
time.
If
you
disconnect
or
otherwise
lose
the
connection,
the
remote
control
beeps
three
warning
beeps,
and
the
Bluetooth
indicator
blinks
quickly.
To connect by Bluetooth technology
1
Turn
on
the
system.
2
Insert
the
Bluetooth
USB
adapter
into
a
USB
port
on
the
system.
3
Display
the
USB
Devices
setup
page:
• (M
‐
Turbo)
Press
the
SETUP
key,
and
then
select
USB Devices
.
WARNING:
To avoid electrical shock, inspect
the USB cable for damage. Do not
use the USB cable if it is damaged.
Caution:
To avoid exceeding emissions limits,
use only the USB cable provided by
SonoSite. Other USB cables may
exceed emissions limits.
To avoid damaging the USB cable,
do not excessively bend or twist it.
Bending or twisting the USB cable
can cause a failure or intermittent
operation.
To avoid disconnecting the USB
cable, maintain slack in the cable,
and do not pull on the remote
control.
WARNING:
Before using the remote control,
make sure that it is connected to
your ultrasound system and not to
another system. (See
“To connect
by Bluetooth technology.”
) Press a
button on the remote control, and
make sure that the ultrasound
system responds as expected.
To avoid [[what?]], keep the
ultrasound system at least 8 inches
(20 cm) from the patient when
using Bluetooth technology. The
Bluetooth dongle can [[cause what
problem?]]
To avoid injury, make sure to
disconnect the remote control after
use.
Содержание SonoRemote Control
