SonoSite M-Turbo, Руководство по обслуживанию

Страница: 19 / 58

Chapter 3: Troubleshooting 15
DICOM
Table 3.2: DICOM Troubleshooting
Error Message Tiller Error Code Cause Troubleshooting
Socket
communication
failed TSOCKET_CONNECT_FAILURE Invalid network
configuration.
Wrong port
number.
Application is not
running.
Printer is offline. Using Ping, verify that the
Printer/Archiver is connected.
• If Ping fails, check the devices IP
address, M-Turbo IP address,
Subnet mask, and Gateway IP
address.
• If Ping is OK, use Verify to check
if device is available.
If Verify fails:
a) Check the Printer/Archiver’s
Port configuration on the
M-Turbo.
b) Ensure that the Printer is
online and the Archiver’s
application is running.
Archiver
transaction
failed TDICARCH_OPEN_FAILURE Wrong Capture
Type selected Verify that the Archiver supports
the selected Capture Type setting,
e.g., US Image, SC Image or
US-Ret Image.
Printer
transaction
failed TDICPRNT_OPEN_FAILURE Wrong Image
settings Verify that the printer supports
the selected Image settings. E.g,.
Color (RGB) or Grayscale
(Monochrome)
DICOM network
communication
failed TDNETWORK_OPEN_FAILURE Device does not
recognize
M-Turbo, rejects
association Verify that M-Turbo AE Title or IP
address is correctly configured on
the Printer/Archiver.
Note: Some devices require that the
Imaging modality (M-Turbo) be
recognized in order to accept
images. This requires configuration
on the device.
Internal failure
detected TDNETWORK_READ_FAILURE Invalid DICOM
Attribute Check M-Turbo Printer DICOM
settings for correctness (e.g., film
size, format)