SonoSite iLook, Руководство пользователя

Страница: 72 / 102

64
Chapter 6: Troubleshooting and Maintenance
T
rou
blesho
oting
To clean and disinfect the transducer cable using the immersion method:
1
Remove any transducer sheath.
2
Clean the transducer cable using a soft cloth lightly dampened in a mild soap or compatible
cleaning solution to remove any particulate matter or body fluids.
Apply the solution to the cloth rather than the surface.
3
Rinse with water or a wipe with water-dampened cloth, then wipe with a dry cloth.
4
Mix the disinfectant solution compatible with the transducer cable, following disinfectant label
instructions for solution strengths and disinfectant contact duration.
5
Immerse the transducer cable into the disinfection solution.
6
Follow the instructions on the disinfectant label for the duration of the transducer cable
immersion.
7
Using the instructions on the disinfectant label, rinse the transducer cable, and then air dry or
towel dry with a clean cloth.
8
Examine the transducer and cable for damage such as cracks, splitting, or fluid leaks. If damage
is evident, discontinue use of the transducer, and contact SonoSite or your local representative.
Cleaning and Disinfecting the Docking Station and Stand
Warning:
To avoid electrical shock, remove the system and extra battery from the docking
station and stand and unplug from power supply before cleaning.
To avoid injury, always use protective eyewear and gloves when performing
cleaning and disinfecting procedures.
To avoid infection if a pre-mixed disinfectant solution is used, observe the solution
expiration date, and ensure that the date has not passed.
To avoid infection, the level of disinfection required for a product is dictated by the
type of tissue it contacts during use. Ensure the solution strength and duration of
contact are appropriate for the equipment. For information, see the disinfectant
label instructions and the recommendations of the Association for Professionals in
Infection Control and Epidemiology (APIC) and FDA.
Caution:
Use only recommended cleaners or disinfectants on docking station and stand
surfaces. Immersion-type disinfectants are not tested for use on docking station
and stand surfaces