All Devices and select the actual drive you’re trying to format.
7. Click ‘Erase’
8. Wait for completion
Once the USB flash drive is FAT16 or FAT32 formatted, copy the upgrade file from the
(tab: Documents) onto the disk. Then, proceed as following:
1. Enter the Service Mode (see Entering the Service Mode)
2. Select FIRMWARE UPDATE
3. Insert the USB key
4. Wait for completion
5. Exit menu, select REBOOT
7.3
Configuration Reset
Configuration Reset will erase all user configuration of the device (including presets).
It is used to set the unit back to factory default.
7.4
Test Interface Menu
The User Interface (UI) test menu allows users to test the rotary encoders, the
encoder push buttons and the OLED display.
The two numbers in the middle of the screen are counters. Use them to test the rotary
encoders. Rotating the encoder clockwise increases the counter and counterclockwise
decreases the counter. An encoder short press highlights its counter.
A left encoder long press shows a full white display (to test all OLED pixels).
A right encoder long press exits the menu.
SX-M2D2+ User Manual
32/37
