Sonoro sonoroRadio, Руководство по эксплуатации

Страница: 95 / 227

17 Troubleshooting
Malfunctions may occur with any electrical equipment. This is not necessarily due to a device defect. As such,
you should check the following table to see if you can eliminate the problem yourself.
Malfunction Possible cause Elimination
Device does not turn on Power cable is not properly con-
nected
Connect the power cable properly
(see Ä Chapter 7.3 ‘Connecting the
power supply’ on page 83).
No sound Volume is set to minimum Increase the volume (see
Ä Chapter 10.2 ‘Setting the
volume’ on page 89).
Sound is turned off Switch on the sound (see
Ä Chapter 10.3 ‘Muting the audio
playback’ on page 89).
Headphones are connected Pull the headphones out of the
jack.
Another mode is set Set the correct mode (see
Ä Chapter 10.1 ‘Selecting a play‐
back mode’ on page 89).
USB playback does not start USB device is not plugged in Insert the USB device into the port
on the back of the device (see
Ä Chapter 14 ‘USB playback’
on page 93).
USB device is not compatible Check whether your USB device is
compatible with sonoroRADIO.
USB device does not contain read-
able audio files
Check the files on your USB device.
Poor FM/DAB reception FM/DAB antenna is not properly
aligned
Change the position of the FM/DAB
antenna.
Remote control does not work, or
only works sporadically
Distance too great Reduce the distance between the
remote control and the device.
Battery empty Replace the battery in the remote
control (see Ä Chapter
7.2 ‘Inserting the battery’
on page 82).
Malfunctions due to other radio
transmitters or devices
Increase the distance between the
source of interference and the
sonoroRADIO. Plug the device into
another socket so that the source
of interference and the
sonoroRADIO are connected to dif-
ferent branch currents.
Device not responding Error in the device Switch the device off and on again.
95