Sonoro sonoroHIFISO-510, Руководство по эксплуатации

Страница: 106 / 279

7 Falling asleep and waking up with
the sonoroHIFI
You can use the device to wake up with FM/DAB
radio, CD, Relax Music or alarm ringtones.
7.1 Setting the alarm
The alarm functions can be used both in standby
mode and when the device is on. The Alarm menu
takes you through the following steps: Setting the
alarm time
→
Setting the alarm source
→
Setting the
alarm volume
→
Setting the alarm repetition fre‐
quency.
i
If you do not enter any information for approx. 10
seconds when setting the alarm, the setting screen
closes without saving your settings.
Setting the alarm time
1. Press and hold or .
ð
The display shows the „
Set
Alarm 1 Time“
set
ting
2.
Press .
ð
You are now in the „
Set
Alarm 1 Time“
setting.
The hour display flashes.
3. Turn until the display shows the correct
hour.
4. Press to confirm the hour.
ð
The minute display flashes.
5. Turn until the display shows the correct
minute.
6. Press to confirm the minute.
ð
The alarm time is set. The display shows the
alarm source „Ringtone“ .
i
Use the and or and but‐
tons to switch between the hours and
minutes displays.
Setting the alarm source
7. Turn to select the alarm source.
FM Select an FM station preset from
the station memory that you
wish to start the device with and
wake up to.
DAB Select a DAB station preset from
the station memory that you
wish to start the device with and
wake up to.
CD Select a track from the CD you
wish to start the device with and
wake up to.
Relax Music Select a Relax Music track from
the memory that you wish to
start the device with and wake
up to.
Ringtone Select a ringtone from the
memory that you wish to start
the device with and wake up to.
Beep
Awakening
Bird
Guitar
Piano
Xylophone
8. Press to confirm the selected alarm source.
ð
The alarm source is set. The display shows
the alarm volume under „Alarm Volume“ .
Setting the alarm volume
9. Adjust the volume from 1 – 32 by turning .
©
sonoro audio GmbH 2016 106