Sonoro SO-310, Руководство по эксплуатации

Страница: 51 / 203

7
Unpacking the device and first
use
Only connection cables and external devices that are
designed for this product in terms of safety, electro-
magnetic compatibility and shielding quality may be
used in conjunction with the device.
7.1 Unpacking the device
All parts of the device are delivered in a cardboard
box.
L WARNING!
The packaging is not a toy! Risk of suffocation!
There is a risk of suffocation if the packaging is
used for playing.
– Keep the packaging in a place that is inacces-
sible to children and persons who cannot assess
the dangers.
1. Unpack the device and all accessories and check
the content to ensure that all parts are included
and intact.
i
Should you detect any damage, please con‐
tact your dealer or sonoro support ( Ä ‘Con‐
tact data’ on page 43) immediately.
2. Place the device in a suitable location and
remove the protective foil from the display.
i
Always comply with the safety instructions
regarding the ambient conditions
( Ä Chapter 2 ‘For your own safety’
on page 43).
3.
L NOTICE!
Damage to the subwoofer!
Carefully remove the cover from the subwoofer
without touching it.
7.2 Inserting the battery
The battery ensures the function of the clock in case
of power failure.
L
WARNING!
Risk of injury if batteries are handled incorrectly!
The incorrect handling of batteries can lead to
injuries due to an explosion hazard.
– Never attempt to recharge, open or short-cir-
cuit the batteries. Risk of explosion!
– Never damage or deform the batteries.
– Never dispose of any batteries in an open fire
or expose them to high temperatures.
– Keep batteries out of reach of children, as it
poses a suffocation risk.
– Fluid may escape due to misuse and cause skin
irritation. In case of skin contact:
– Rinse it off with plenty of water.
– Do not rub your eyes, but rinse eyes with
plenty of water for 10 minutes and seek
immediate medical attention.
L NOTICE!
Improper handling of batteries can lead to mate-
rial damages!
Improper handling of batteries can damage the
device.
– Do not insert batteries the wrong way. Ensure
that they have the correct polarity.
Fig. 7: Inserting the battery
1.
Open the battery compartment cover on the
back of the device with a small coin (Fig. 7).
2. Insert the supplied battery with the label side
up.
3. Insert the battery compartment cover and close
it with a small coin.
7.3 Connecting the power cord
The device is supplied with power by means of the
supplied mains cable. The AC transformer is inte-
grated in the device itself.
©
2013 51