Sonoma SGR30MLP, Инструкция по использованию и уходу

Страница: 6 / 19

Grill Assembly
4. Install one self tapping screw into the bottom front hole
of the shelf to lock shelf in place. (See Fig. 7)
5. Remove the nut from the orifice end of the side burner
assembly. (See Fig. 8)
6. Cross the orifice of the side burner assembly through
the hole on the bracket of the side IR burner, use the
nut to secure the orifice in position. (See Fig. 9)
7. Slide the valve assembly through the center hole in the
front of the shelf. (See Fig. 10)
8. Insert one valve screw through the bezel and in to the
side burner valve and tighten. Next, install the second
valve screw through the bezel and tighten. Make sure
the bezel is installed with the "H" facing the igniter hole.
(See Fig. 11)
9. Install metal knob, making sure to line up the flat side of
the valve stem with the flat side of the knob stem.
(See Fig. 12)
10. Install grate over side burner. (See Fig. 13)
Self tapping screw
Self tapping screw
Fig. 7
Fig. 8
Nut
Orifice
Fig. 9
Side burner
assembly
Orifice
Bracket
Nut Side IR
burner
Fig. 10
Side burner valve
Fig. 11
Fig. 12