Converting the Side Burner to NG
1. Remove side burner grate, porcelain cap and
burner head. (See Fig. 28)
2. Remove the LP regulator hose attached to the
side burner LP valve assembly. (Located on the
under side of the side burner.) (See Fig. 29)
3. Remove the control knob from the front of the
side burner. (It should pull off by hand.)
(See Fig. 30)
4. Remove the two (2) screws holding the bezel and
valve in place. Remove bezel from the front of
the side burner. (See Fig. 31)
5. Remove the two (2) screws holding the side
burner LP valve assembly in place. This will
free up the assembly. (See Fig. 32)
7
Fig 29
Fig 32
Fig 31
Underside of side
burner shelf
Fig 28
SGR27 Natural Gas Conversion Instructions
Valve Assembly
Screw
Screws
Bezel
Fig 30
