SWH 056
• charging •
SWH 056
CHARGING
Use the Micro USB cable to connect the 056 to a
charging outlet or your PC.
The red LED light is always on during charging. The
red light is off when fully charged. It usually takes
approximately 2 hours to attain full charge.
LOW BATTERY ALARM
When the battery power is less than 10% (and
the voltage is lower than 3.3V) the headphone
emits a beeping prompt tone, and the red light will
blink. When the battery voltage is lower than 3.1V,
wireless functionality turns off automatically.
PLEASE NOTE
1. Please do charge the headphone regularly
2. The headphone turns off automatically when
charging
• pairing •
1. Press and hold the button for about 5
seconds to enter pairing mode
2. Please select “SWH 056” to pair with your
device
3. Enter “0000” for pairing connection if PIN
code requested
4. There is a “CONNECTED” voice prompt when
pairing is successful
NOTE
•
The headphone will enter into standby mode
after 10 minutes if no device is paired
•
Use the 3.5 mm ep cable for wired operation
•
Wireless function will be disabled in wired
mode.