a keyboard, an electronic drum set, a MIDI sequencer (hardware or in your DAW), or any other
controller that sends MIDI notes.
The MAFD Luxe can receive MIDI via the standard DIN or as a USB host (i.e., plug in a USB
MIDI device like a pad controller, or use a powered USB hub to connect up to four devices).
Incoming MIDI except for SysEx messages is echoed out of the MIDI Thru DIN. This means the
MAFD Luxe can be used as a USB host to MIDI DIN converter.
Other MIDI-to-CV functions include 1V/Oct pitch with +/-2 semitones pitch bend range, velocity,
pressure (aka aftertouch - channel and/or poly), gate, trigger, and CCs 14-17. Also, four
MIDI-to-clock trigger patterns are provided: straight eighth notes, half-swing eighth notes, (full)
swing eighth notes, and dotted eighth note followed by a sixteenth.
Specifications
● 16 hp x 32 mm deep Eurorack module with a standard 16 pin power connector
● MIDI inputs: USB host (supports a single USB device or up to four USB devices via a
powered USB hub) and standard DIN
● MIDI Thru output: standard DIN
● MAFD MIDI-to-CV outputs (x2): To Adv/Clock, Velocity, Inverse Velocity, Pressure,
Inverse Pressure
● MIDI note-to-CV outputs: 1 Volt/Octave, Gate, Trigger, Velocity, Inverse Velocity,
Pressure, Inverse Pressure
● MIDI CC-to-CV outputs: CC 14, CC 15, CC 16, CC 17
● MIDI clock-to-trigger outputs: 1:1 is straight 1/8th notes, 7:5 is half-swing 1/8th notes, 2:1
is (full) swing 1/8th notes, and 3:1 is a dotted 1/8th note followed by a 1/16th note
● The On/Off button enables/disables the Clock outputs, and the Reset button resets the
internal clock count to zero (the start of a measure).
● The trigger button outputs triggers for To Adv/Clock (x2), Trigger, and the clock outputs.
Powering your MAFD Luxe
Use a standard 16-pin Eurorack power cable. Mind the polarity marked on the PCB.
Содержание MAFD Luxe
Страница 3: ......
