Program - Manuals
DCW Top Brush
© SONNY’S The CarWash Factory
SonnysDirect.com
This document is confidential and proprietary to SONNY’S and cannot be used, disclosed or
Page 19 of 21
duplicated without prior written consent. Content, prices and availability subject to change without notice.
4.29.2019
OwnersManual_TopBrush_DualCounterweight_16v1.docx
*PREVENTIVE MAINTENANCE*
DAILY
1. Check all lines and fittings for leaks. Repair, or replace, as needed.
2. Check brush for proper operation, listening for any unusual noises from the equipment.
3. Inspect brush cloth for cuts, grease, or oil. Remove and repair, or replace, any cloth
panel if any of these conditions are found.
4. Check the brush retract and extend for proper operation, smoothness and correct
application pressure.
WEEKLY
1. Spray lubricant on the clevis pins on both ends of the retract cylinders.
2. Grease the brush shaft bearings. Do not allow grease to come in contact with brush cloth.
FOR THE FIRST MONTH OF OPERATION CHECK ALL HARDWARE AND FITTINGS FOR
TIGHTNESS EACH WEEK.
PERFORM THIS INSPECTION TO THE SCHEDULE SHOWN BELOW AFTER THE FIRST
MONTH OF OPERATION.
MONTHLY
1. Inspecting all hardware and fittings for tightness.
2. Grease all bearings. Do not allow grease to come in contact with brush cloth.
3. Inspect the bumper stops for wear to ensure the air cylinders have not reached the end of
their travel. If bumper stops are worn they can be flipped to extend life.
4. Thoroughly clean the equipment and framework.
SEMI-ANNUALLY
1. Carefully inspect brush equipment cloth for wear and damage. Replace as necessary.
