SONNOC SNP-LU7000, Руководство пользователя

Страница: 42 / 52

Section 5: OPERATION
Projector User Manual
5-4
to define or change the color gamuts needed for your environment and
applications.
Enable the selected method (Meter or Manual Adjustment)- this will
automatically disable the other method. For both methods, if Auto Test Pattern
is enabled, the solid colored test pattern will be displayed according to the
menu item on which you are positioned.
• Meter
Adjustment
1 Using a color meter, enter the current x and y co-ordinates of Red,
Green, Blue and White for the projector image into the Measured Data
menu. This is the reference point for the projector. The default values in
the menu are based on the average for all projectors.
2 After measuring the values for all the projectors to be matched,
calculate the target values.
3 Enter the target values for x, y and gain for each color into the Target
Data menu.
• Manual Adjustment
1 Adjust color slide bars and judge image color by eye or meter. A user-
defined color "adjustment" can be applied.
2 Use this submenu if you do not have specific color coordinates in mind
and will judge color performance by eye or meter. As for Meter
Adjustment, each color control actually defines new x/y coordinates for
that color and changes its hue. The main colors (red part of red, green
part of green and blue part of blue) adjust the intensity of that color
component, while the modifying colors (e.g. green part of red and blue
part of red) modify the x and y value and change the hue of that color.
At the same time the main colors also are used to control the color of
the white point.
Measured
Data
Target Data
Green
Blue
Red