Rear panel connections
AC IN:
Connect to mains outlet
.
(Do this after all connections to the amplifier and the turn-table have been
made and checked)
ON:
Mains ON/OFF switch. To avoid “pop” noises, the Sedley should be switched
FIRST ON, LAST OFF in your system, or make sure that your amplifier
volume is turned down when switching your Sedley ON or OFF, or when
adjusting the DIP switches.
USB (option):
USB port for connection with computer for playback or backing up records.
Input:
Connect the outputs from your turntable to these 2 connectors.
L/R Output:
Connect this out to an input of your amplifier (not PHONO).
Earth Tag:
Mo
st turntables have an earth connection to connect here for possible “hum”
reduction. We recommend you to try this connection for “hum” reduction.
DIP switches:
Use these switches to set up correct matching for your cartridge, please see
the next section.
DIP Switches
Switches shown in UP position!
Please note:
The two banks of DIP switches mirror one another (i.e. Left 1 = Right 10 and
Left 10 = Right 1).
To adjust your DIP switch settings:
Please refer to your cartridge specifications for setup information.
Please switch off your amplifier and the Sedley before commencing with the setup.
We recommend the use of a small flat blade screwdriver for setting up the DIP switches
(please do not use a pen or sharp knife as this will damage the switches).
We also recommend that you adjust your DIP switches on one channel first before
adjusting the other channel.
R output Input L Output AC IN ON
DIP SWITCHES FOR EACH CHANNEL
Earth Tag
Please note: Right Channel switches are MIRRORED to LEFT Channel switches !
USB
