1-2
Tempo Ultra ATA66 Installation
To install the Tempo Ultra ATA66, follow these steps:
1.
Shut down computer.
2.
Remove the case cover from computer.
3.
Remove the Tempo and Ultra ATA66 cable
from packaging materials.
4.
Determine the number of hard drives that are
going to be installed inside your computer
with the Tempo. (See page x, “Ultra ATA66
Cable/Drive Configurations” for further
information.)
Support Note:
We recommend you
make a backup of important information
on your system’s current hard drive(s) prior to
installing new hardware or software. When
handling computer products, you must take care
to prevent components from being damaged by
static electricity. Always ground yourself by work-
ing in an area free of static electricity and avoid
carpeted areas. Handle the Tempo only by its
edges, and avoid touching connector traces and
component pins on PCI cards, hard drives, and
other IDE devices.
Support Note:
When an existing drive
(one with data on it already) is connected
to the Tempo Ultra ATA66, you must reinitialize
the drive for your system to recognize it. Since all
data will be erased, make a backup if necessary
prior to connecting the drive to the Tempo.
