Sonnet Tempo SSD Pro Plus, Быстрый старт

Страница: 4 / 8

2
SSD Installation Steps
1. Remove the SSDs from their packaging.
2. Place an SSD label side up on top of the
Tempo SSD Pro Plus card with the SSD’s and
card’s connectors aligned with each other
(Figure 1) .
3. Push the SSD’s connector into the Tempo
card’s connector until the SSD is completely
seated
(Figure 1) .
4. Holding the SSD firmly against the card, flip
the Tempo card over again.
5. Using four of the eight screws provided,
secure the SSD to the Tempo card; do not
overtighten the screws
(Figure 2) .
6. Flip the Tempo card over again, and then
place the second SSD label side up on top of
the card with the SSD’s and card’s connectors
aligned with each other
(Figure 3) .
7. Push the SSD’s connector into the Tempo
card’s connector until the SSD is completely
seated
(Figure 3) .
8. Holding the SSD firmly against the card, flip
the Tempo card over again.
Figure 2
Figure 3
Figure 1