background image

Quick Start Guide for Tempo SATA E4i

You Should Have

The following items should be included in your product package:

• One Tempo SATA E4i card
•  One Serial ATA data cable
• One Sonnet Software CD

The following items may be required (sold separately):   

• Medium Phillips screwdriver
•  One or more Serial ATA data cables
•  Internal drive mounting hardware
•  One or more legacy (4-pin) power cable Y-adapters
•  One or more legacy to Serial ATA (4-pin to 15-pin) power cable 

adapters

•  One or more Ultra ATA to Serial ATA adapters (only used to support 

parallel ATA drives)

System Requirements

Tempo SATA E4i requires the following in order to operate in your 
system:
• One available PCI Express (PCIe) x4 slot*
•  Mac OS

®

 X Version 10.3 or later, Windows

®

 7, Windows Vista

®

, or 

Windows XP with SP2 installed**

*   x1 slot compatible, but with reduced performance
**  Creating RAID volumes under Windows requires dynamic disk storage, a 

formatting option available with Windows Server 2008 R2, Windows Server 

2003 SP1, Windows 7 Professional, Enterprise or Ultimate (32- and 64-bit 

versions), Windows Vista Enterprise or Ultimate (32- and 64-bit versions), or 

Windows XP Professional (32- and 64-bit versions).  

In order to create RAID volumes larger than 2TB, you must do one of the 

following: Span (link together in a virtual chain) the volumes, and then 

format them as NTFS. -

OR

- Use GPT formatting. Note that drives and 

volumes with GPT formatting are not visible to any version of Windows XP 

Professional, nor to the 32-bit version of Windows Server 2003 SP1.

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–4 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]
Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6349 

©2010  Sonnet Technologies,  Inc.  All  rights  reserved.  Sonnet,  the  Sonnet  logotype,  Simply  Fast,  the  Simply  Fast  logotype,  and Tempo  are  trademarks  of  Sonnet Technologies,  Inc.  Mac,  the  Mac  logo,  Mac  OS,  and  Power 
Mac  are  trademarks  of Apple  Inc.,  registered  in  the  United  States  and  other  countries.  Other  product  names  are  trademarks  of  their  respective  owners.  Product  specifications  subject  to  change  without  notice.    
QS-TSATAII-E4i-E-D-061410

 

 Support Notes:

 We recommend that you make a backup of 

important information on your system’s current hard drive prior 

to installing new hardware or software. 

When handling computer products, you must take care to prevent 
components from being damaged by static electricity. Before opening 
your computer or removing parts from their packages, always ground 
yourself first by touching a metal part of the computer, such as a port 
access cover, and work in an area free of static electricity; avoid carpeted 
areas. Handle all electronic components only by their edges, and avoid 
touching connector traces and component pins. Also, avoid touching 
the logic board and any of its components.

TEMPO

 SATA E

4

i

              Serial ATA Host Controller for PCI Express® Slot

Содержание TEMPO SATA E4i









Отзывы: