background image

Tips

This section covers some tips for using the Fusion R400QR5 
enclosure.

Hot-swapping

:

When connected via eSATA data cable to a Mac running Mac 
OS X, Fusion R400QR5 supports hot-swapping

*, enabling you 

to exchange a set of drives without having to shut down your 
computer. This does not mean you can simply pull out the drives 
at any time; you must follow the procedures below or you may 
lose data, or cause the system to go into a degraded state in the 
process. 

 •  Before removing any of the drive modules, you must put away 

(“eject”, “unmount”, “dismount”) the drive volume. Simply 
drag the drive icon associated with the drive(s) you wish to 
remove to the eject icon on the dock (or trash can on the 
desktop). 

 •  

Power off the enclosure before reinserting the drive 
modules

. Once the modules are secured, power on the 

enclosure again; this will ensure that the RAID set will mount 
properly. 

*  Windows does not provide hot swap support for drives (drive 

enclosures) connected to a SATA host controller card installed in a 
desktop PC or server. 

Connections:

•  

Fusion R400QR5 supports only one interface at a time

Do not connect more than one cable at a time between the 
enclosure and computer; no damage will occur, but only one 
interface will function.

Tips and Additional Information

Contacting Sonnet Customer Service

USA Customers

The Sonnet Web site located at www.sonnettech.com has the 
most current support information and technical updates. Before 
you call Sonnet Customer Service, please check our Web site for 
the latest updates and online support files, and check this User’s 
Guide for helpful information. When you call Sonnet Customer 
Service, have the following information available so our customer 
service staff can better assist you:
• Product name 
• Date and place of purchase 
• Hard drive model(s)
• Computer model 
• Operating system 
• Software/firmware versions

If further assistance is needed, please contact us at:

Sonnet Customer Service:  
Online Service Form

: http://serviceform.sonnettech.com

Tel

: 1-949-472-2772 

(Monday–Friday, 7 a.m.–4 p.m. Pacific Time) 

Fax

: 1-949-457-6349

E-mail

[email protected]

For Customers Outside the USA

For support on this product outside the USA, contact your reseller 
or local distributor. 

Visit Our Web Site

For the most current product information and online support 
files, visit the Sonnet Web site at www.sonnettech.com/support/. 
Remember to register your product online at http://registration.
sonnettech.com to be informed of future upgrades and product 
releases.

11

Содержание FUSION R400QR5













Отзывы: