aCeLeC
Model One
Model One
Model One
Model One
Connecting
2.
Connect the other cable ends to the loudspeaker outputs of your
switched off power amp (see Fig. 2).
Note
Please make sure that the red marked post of the speaker is connected to the red
marked output of the amp, and the white or black marked post to the white or black
marked output accordingly.
Bi-wiring/bi-amping
The Model One feature a carefully fine-tuned cross-over, optimized using selected
parts and an advanced circuitry to achieve a truly balanced and smooth frequency
response. Therefore, dividing the frequency sections through bi-wiring or bi-amping
is neither beneficial nor optional.
Choice of loudspeaker cable
The loudspeaker cable can have an impact on sound quality. In general, quality cable
products will yield a quality result.
The Model One is designed to be very neutral and thus are not extremely suited to any
particular type of cable. The choice of cable is as much a factor of matching the cable
to the entire audio system. Please consult your local dealer for information about
compatible loudspeaker cables that will suit both your electronics and your
loudspeakers.
Fig. 2
Amplifier loudspeaker outputs (example)
