Sonnenkonig VENTUS 200, Руководство пользователя

Страница: 34 / 52

34 35
• When you do not use the appliance for a long time, unplug it. Do not stay away from the heater
for too long when it is in use. Pull the plug straight out, never remove the plug by pulling on the
cord.
• Keep the heater far from curtains or places where the air inlet can easily be blocked.
• The power coupler is waterproof when not in use. In order to prevent possible electric shock or
leakage current, never use the appliance with wet hands or operate the appliance when there is
water on the power cord.
• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems avail-
able. If electrical appliances are disposed of in landfills or dumps, hazardous substances can
leak into the groundwater and get into the food chain, damaging your health and well-being.
• Children should be supervised to ensure that they do not play with the appliance.
2. Introduction
3. Technical specifications
• Depending on the power cord type, this fan heater may only be used in households, warehouses
and workshops, building sites or greenhouses respectively. It contains a thermostat and a self-
resetting thermal cut-out to control the heating elements. The thermostat examines the air tem-
perature and controls the surrounding temperature. The fan motor is not controlled by the ther-
mostat and keeps on working when the thermostat cuts off the heating element. The self-resetting
thermal cut-out will switch off the heater to ensure the safety when overheating.
• When using the heater for the first time, you may notice a slight emission of smoke. This is quite
normal and it stops after a short time. The heating element is made of stainless steel and was
coated with protection oil by production. The smoke is caused by the remaining oil when heated.
Model VENTUS 200 VENTUS 210 VENTUS 500 VENTUS 900 VENTUS 1500
Waterproof
class
IPX4 IP20 IPX4 IPX4 IPX4
Voltage
220 – 240 / 50 Hz
220 – 240 / 50
Hz
400 / 50 Hz 400 / 50 Hz 400 / 50 Hz
Required
power
2000 Watt 2000 Watt 5000 Watt 9000 Watt 15000 Watt
Current
8.7 A 8.7 A ~ 9 A 7.2 A 13 A 21.7 A
Required fuse 10 A 10 A 10 A 15 A 25 A
EN