Sonnenkonig 30301412, Руководство пользователя

Страница: 36 / 52

EN
36
04 - CLEANING, CARE AND MAINTENANCE
05 - TROUBLESHOOTING
WARNING: The heater must be properly installed before use.
• Connect the patio heater to a grounded 220-240V, 50Hz electrical outlet.
• Operate the heater only when it is in the upright position.
• Our electric patio heater is equipped with three heat settings.
Remote control
• Insert 2 x AAA (1.5 V) batteries into the remote control.
• Press the on/off switch to activate the heater.
• To operate the heater on low power (800 W), press the left button on the remote
control.
• To operate the heater on medium power (1000 W), press the right button on the
remote control.
• Press both the left and right buttons on the remote control to set the maximum
power (1800 W).
• To operate the LED light, press the top button on the remote control.
Controls directly on the unit
• Press the on/off switch to activate the heater.
• Touch the touch switch once to operate the heater at 800 W power.
• Touch the touch switch twice to operate the heater with 1800 W power.
• Touch the touch switch three times to activate the LED light without heating.
• Touch the touch switch four times to activate the LED light and operate the heater with 1800 W
power.
• Touch the touch switch five times to switch off the light and the heater.
If the heater does not work, please check the following points before repairing:
• Check that the power cord is plugged into an electrical outlet.
• Check if the power to the main fuse is working.
• Make sure the power switches are turned on. If not, select a setting.