46
47
EN
4. USAGE
NOTE: DO NOT ALLOW THE DEVICE TO BE USED BEFORE
THE FIRST COMMISSIONING AT LEAST 12 HOURS.
1. Timer
Power-Off -Timer:
When the unit is turned on, the timer button can be pressed to
control when the unit is to be turned on�
Power-On-Timer:
When the unit is turned off , the timer button can be pressed to
control when the unit is to be turned on�
The time can be set between 1-24 hours�
When the timer is turned off , the display will show the humidity again after 5
seconds�
2. Dehumidifi cation
Dehumidifi cation can be set on the control panel using the „Up“ and „Down“ but-
tons between 30-90% or „CO“ for continuous� As soon as the humidity drops to the
set humidity level, the compressor switches off and the fan continues to run at a
low level for good air distribution�
3. Laundry drying (SECCO 2000)
The device runs on a high level independent of the humidity of the air in order to
remove the moisture from the laundry�
4. Display
• When the unit is connected, it shows the current humidity�
• When the humidity is set, the display shows this setting�
• When the timer is set, the display shows the remaining time�
• If the humidity is below 35%, the display will show „LO“�
• If the humidity is above 95%, the display shows „HI“�
