Sonnenkonig 10000312, Руководство пользователя, Страница: 73 / 84

73
GB
Timer settings for automatic switch-on/off
On/off button
Use the on/off button to switch the appliance on and off.
Warning light
Condensation may form in the appliance. When the inside tank is full, the warning
light on the LCD display lights up, and the appliance switches itself off until the tank is
emptied.
Mode button
There are three possible settings for the mode button:
Cooling • Dehumidify • Fan
The settings are adjusted with Mode Control button. A light will indicate which setting is
currently being used.
Cooling mode
If cooling mode is selected, appears on the LCD display. In cooling mode, the air is
cooled, and warm air is conducted outside through the exhaust hose. The ventilation
speed and the air temperature can be adjusted to your needs.
Note:
in cooling mode,
the exhaust hose must be directed outside.
Dehumidify mode
If dehumidify mode is selected, appears on the LCD display. The control lamp
lights up in orange. The air is dehumidified as it is conducted through the appliance
without the appliance being in full cooling mode. The fan runs on medium speed. The
fan speed cannot be changed in dehumidification mode.
Note: if using the appliance
as a dehumidifier, do not connect the exhaust hose. Instead allow the warm air to be
conducted back into the room. Water must be constantly drained from the appliance.
Fan mode
If fan mode is selected, , or appears on the LCD display. Air is circulated
throughout the room without cooling.
Note: in fan mode, the exhaust air does not have to be conducted outside.
Ventilation speed button
There are three settings for the ventilation speed button: high, medium and low.