SONIX 8-BIT MCU OTP Easy-Writer
SONiX TECHNOLOGY CO., LTD
Page 4
V1.1
1
1
1
SONiX 8-BIT MCU OTP EASY WRITER
ABOUT SONiX 8-BIT MCU OTP EAST WRITER
In order to provide R&D personnel with a simple writer, we devised a new writer: ”EZ WRITER”.
FUNCTION INTRODUCTION
EZ_WRITER can programming all series of SONiX OTP MCU, which control by SONiX 8-bit
MCU ICE. Different OTP MCU should cooperate with different transition board.
Support WRITER transition board and ICE transition board.
When used WRITER transition board, you can put OTP MCU on 48pins text tool.
It need't to update the firmware or control IC in EZ Writer when add new type OTP MCU.
When add new type MCU, it only need to change the programming software.
SONiX 8-bit MCU ICE supply power to EZ Writer.
Automatically check the VPP and VDD voltage.
When used “Blank Check & Verify” function, it will show error position
、
OTP data and source
data.
VPP voltage will show in Information dialogue block at all times, and user can adjust VPP
voltage anytime.
Programming software build in compiler, and it can show error message.
Programming speed depend on ICE’s system clock. EZ Writer initial
Mode is 4MHz Crystal,
and the ranges between 4M and 20MHz Crystal. We don’t advised using slow system clock,
because it will waste a lot of times.
When used “Read OTP” function, it will show the dada from OTP MCU.
Note: After running “READ OTP” function, the data will store at “filename.bbb” file.
