manualshive.com logo in svg

SONiX TECHNOLOGY CO. SN8F22711B, Руководство пользователя

Поделиться
Скачать
SONiX TECHNOLOGY CO. SN8F22711B Скачать руководство пользователя страница 54

                       SN8F2270B Series 

USB 2.0 Low-Speed 8-Bit Micro-Controller

 

SONiX TECHNOLOGY CO., LTD

                                 

Page 54

                         

 

 

Version 1.3

 

 

5.3 WAKEUP 

 

5.3.1 OVERVIEW 

 
Under power down mode (sleep mode) or green mode, program doesn’t execute. The wakeup trigger can wake the 
system up to normal mode or slow mode. The wakeup trigger sources are external trigger (P0, P1 level change), 
internal trigger (T0 timer overflow) and USB bus toggle. 
 

z

 

Power down mode is waked up to normal mode. The wakeup trigger is only external trigger (P0, P1 level change 
and USB bus toggle) 

z

 

Green mode is waked up to last mode (normal mode or slow mode). The wakeup triggers are external trigger (P0, 
P1 level change), internal trigger (T0 timer overflow) and USB bus toggle. 

 

5.3.2 WAKEUP TIME 

 
When the system is in power down mode (sleep mode), the high clock oscillator stops. When waked up from power 
down mode, MCU waits for 4 internal 6MHz clock or 2048 external 6MHz clocks as the wakeup time to stable the 
oscillator circuit. After the wakeup time, the system goes into the normal mode.   
 

 

’

 

Note: Wakeup from green mode is no wakeup time because the clock doesn’t stop in green mode. 

 

 
 
The value of the wakeup time is as the following. 
 

“6MHz IHRC” mode:   

 

The Wakeup time = 1/Fosc * 2048 (sec) + high clock start-up time 

 

 

 

’

 

Note: The high clock start-up time is depended on the VDD and oscillator type of high clock. 

 

 

 

Example: In 6MHz IHRC mode and power down mode (sleep mode), the system is waked up. After the wakeup 

time, the system goes into normal mode. The wakeup time is as the following.   

 

 

The wakeup time = 1/Fosc * 2048 = 0.341 ms  (Fosc = 6MHz) 

 

The total wakeup time = 0.1705 ms + internal high RC oscillator start-up time 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание SN8F22711B

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды