SONIQ L60U11A-AU, Инструкция по эксплуатации, Страница: 21 / 26

Software Application Software Application
Click “Upgrade” and open the authorization document, then it can upgrade. (The correspond
authorization document is in the box.)
User also can upgrade “Dual Splicing” in the same way.
4.4.2. Configuration
Configuration supplies Service Parameters for user to select.
“Service Parameter”
（
Right key part only can be adjusted in Single point mode
)
Default setting is recommended in the configuration of service parameter. User can
modify it if necessary. Below are the introductions of each parameter:
Right Key Delay Time: Set the time of achieving right click.
Right Key Spatial
Tolerance: When the finger press on the screen, there will be a
range of jitter, which is acceptable. The jitter points are regarded as same point, in
order to achieve right click.
Smooth Coefficients: make sure the drawing line will not dither largely.
4.4.3. Control
39 38
TS02R02B021B
00003513
Upgrade