Main Unit Control
5
Note:
Please use the above instructions according to the actual keys showed on
TV.
Front View
Remote Control
Sensor Window
Receives signal from Remote Control. Do not put any
objects in front of the window to hinder the reception
of signal.
Press these buttons to sequentially select channels.
When the OSD menu is on, press these buttons to move
the selection focus up or down to change settings.
CH
Press VOL- to decrease volume, or VOL+ to increase.
At the OSD menu, press these buttons to move the
selection focus left and right to change settings.
VOL
Press this button to turn the unit on when it is in standby
mode.
Press this button once more to put it to standby mode.
STANDBY
Power Indicator
Flashes red when the unit is powered on;
Lights up red when the unit is in standby mode.
1
Press this button to display the OSD menu.
When the OSD menu is on, press this button to exit the
menu.
MENU
6
Press to display all available input signal sources.
Press to cycle through various sources.
SOURCE
5
7
1
2
VOL
VOL+
STANDBY
SOURCE
MENU
CH
CH+
3
4
5
5
6
7
2
3
4