background image

Redbox User Handbook No 1

7

DIGIT

AL A

UDIO C

ONVERTERS - RB

-ADD

A

DIGITAL AUDIO CONVERTERS

Technical Specifications RB-ADDA

  A/D Connections

  Analogue Inputs: 

2 x XLR 3 pin (balanced) (L & R)

 

2 x RCA phono (unbalanced) (L & R)

  Digital Outputs: 

1 x AES/EBU XLR 3 pin plug

 

1 x S/PDIF RCA phono socket

  A/D Audio Specification

  Maximum Input Level: 

+27dBu (balanced inputs) 

Maximum Input Level: 

+17dBu (unbalanced inputs)

  Input Impedance: 

>10kΩ bridging (balanced inputs)

Input Impedance: 

>20kΩ (unbalanced inputs)

  Input Levels: 

Swit24dBu/+18dBu/+12dBu for FSD

Gain Range: 

Adjustable 3dB loss to 3dB gain (L and R adjust)

  Signal to Noise: 

Better than –109dbFS (RMS A-weighted at 24bit)

Dynamic Range: 

>110dB

  Distortion and Noise: 

>96dB THD + N at 1kHz

  D/A Connections

  Digital Inputs: 

1 x AES/EBU XLR 3 pin female

 

1 x S/PDIF RCA phono

  Analogue Outputs: 

2 x XLR 3 pin male (balanced) (L & R)

 

2 x RCA phono (unbalanced) (L & R)

  D/A Audio Specification

  Max Output Level: 

+24dBu (balanced outputs)

Max Output Level: 

+14dBu (unbalanced outputs)

  Output Impedance: 

<50Ω (balanced outputs)

Output Impedance: 

<75Ω (unbalanced outputs)

  Dynamic Range: 

>100dB

Gain Range: 

Selectable 12dBu, 18dBu or 24dBu output level, ref FSD

  Other Connections

  Mains Input: 

Filtered IEC, 110-120V, or 220-240V switchable, 10W max

Fuse Rating: 

Anti-surge fuse 100mA 20 x 5mm (230VAC)

 

Anti-surge fuse 250mA 20 x 5mm (115VAC)

  Operational Controls

  Analogue Input Select: 

XLR or phono, via push-switch  

Bit Depth: 

16, 20 or 24 bits via DIP switch

  Digital Output Select: 

AES/EBU or S/PDIF, via push-switch 

Modes & Frequencies: 

16 way rotary DIP switch

  Digital Input Select: 

AES/EBU or S/PDIF, via push-switch 

Channel Status Bits: 

Set to consumer or professional mode via DIP switch

  Equipment Type

  RB-ADDA  

 

Combined A/D and D/A converter

  Physical Specifications

  Dimensions (Raw) 

48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) 

   

19” (W) x 4.3” (D) x 1.7” (H) (1U)

Dimensions (Boxed) 

58.5cm (W) x 22.5cm (D) x 7cm (H)

 

23” (W) x 8.9” (D) x 2.8” (H)

  Weight 

Nett:  1.6kg  Gross:  2.2kg  Nett:  3.5lbs  Gross:  4.8lbs

1

Содержание RB-ADDA








Отзывы: