Sonifex NICA X Скачать руководство пользователя страница 15

Страница: 15 / 64

NICA X Reference Manual

Coding Mode

Coding Delay

APT 64k mono

~ 13mS

APT 256k stereo

~ 5mS

APT IMUX 2 x 64k mono

~ 13mS

APT 64k mono over ISDN (local call)

~ 17mS

3.1.1.3 – Auto Synchronisation

When operating in a CLEAR Date Mode, the NICA X sets the auto synchronisation mode of the apt-X100 chip to

automatically synchronise to the incoming data stream. In an IMUX mode the Autosync is not required as the

IMUX process itself deals with the synchronisation of the audio data stream.

3.1.1.4 - CLEAR Mode

CLEAR mode will only operate at 64kbit/s on 1 channel of ISDN to give 7.5kHz mono audio. On a fixed data

service such as a Kilostream, Satellite link or Microwave link, the NICA X can operate at either 64k, 128k or 256k.

The clock can be provided by the network or internally by the NICA X.

The CLEAR mode enables the unit to operate with other products using aptX-100 coding on just 64kbit/s.

3.1.1.5 - IMUX Mode

The IMUX mode employs APT's inverse multiplexing technique known as MUCAS. This links two 64kbit/s channels

together, taking into account any delays between the two data stream clocks and any slippage, to give a 128kbit/s

data stream which the codec can then utilise.

In IMUX mode the NICA X will operate at 7.5kHz mono over 64kbit/s, 15kHz mono over 2x64kbit/s and 7.5kHz

stereo over 2x64kbit/s.

3.1.1.6 - Stereo/Mono Operation

In CLEAR mode the NICA X can operate in mono over 64kbit/s, mono or stereo at 128kbit/s, and stereo only at

256kbit/s.

With IMUX modes the stereo operation is only relevant for 2 x 64kbit/s data channels. To operate in stereo mode

in IMUX, only one unit needs to be set to stereo as the other unit will automatically change to stereo.

In IMUX mode the NICA X can operate in mono mode at 7.5kHz audio bandwidth over 64kbit/s and 15kHz audio

bandwidth over 2x64kbit/s. In IMUX mode the NICA X can operate in stereo mode at 7.5kHz audio bandwidth over

2x64kbit/s.

If the unit is operating in stereo mode and one 64kbit/s data channel is lost, then the unit will continue to operate

at 7.5kHz mono.

The table below summarises the variations.

Data

64kbit/s

IMUX mode

2 x 64kbit/s

IMUX mode

Mono

mode

7.5kHz

15kHz

Stereo

mode

7.5kHz

Mono

7.5kHz

Stereo

3.1.1.7 - Auxiliary Data

Quick Reference Table

MEANS OF

CONTROL

REMOTE

CONTROL

DIP SWITCHES

ACTION

- SYSTEM-CONFIG

- 6.AUXDATA

AUX

6,7,8

If enabled the auxiliary data uses part of the audio data stream. Therefore the audio quality is slightly affected by

the reduction in data bits used to represent the audio. The higher the baud rate, the more data is "stolen" from

the audio data. The apt-X100 Codec can operate at 1200, 2400, 4800, 9600 baud rate.

The auxiliary data channel within the audio data stream is only active when enabled. It will only operate with

another codec which has the auxiliary data enabled. The baud rate between two units is determined by the unit

with the highest setting. The auxiliary data can be used in any mode e.g. Mono/Stereo, CLEAR/IMUX

NOTE:

If a codec has the auxiliary data enabled and connects to a codec with it disabled the audio will be

corrupted.

Содержание NICA X

































































Результаты поиска

Содержание NICA X

Отзывы:

Бренды по названию

Популярные бренды

Sonifex NICA X, Справочное руководство

Результаты поиска

Содержание NICA X

Отзывы:

Бренды по названию

Популярные бренды