13
AVN-GMC Webserver & Webpage Parameter Details 2
Network Settings
IP Address
Enter the static IP address that you wish to assign to this unit. This
IP address will be used if DHCP is disabled or if no DHCP server is
detected. The default IP address is 192.168.0.92
Subnet Mask
Enter the subnet mask of the network you wish to connect to.
The default subnet mask is 255.255.255.0
Gateway IP Address
Enter the gateway IP address of your router.
The default gateway is 0.0.0.0
Fig 2-4: AVN-GMC Network Settings Screen
Network Settings
Accessible by selecting Config > Network Settings on the web page.
DHCP
Enable DHCP to allow the unit to acquire its IP address automatically from a DHCP
server. Disable DHCP to use the static IP address entered on this page. DHCP is
initially enabled, the unit will automatically default to static network settings after
45 seconds if no DHCP server is detected.
Auto IP
Enabling Auto IP allows the unit to configure its own IP address without the need
of a router in the form 169.254.X.Y, where X and Y are numbers between 0 and 255.
Ensure the connecting device has Auto IP enabled. If both DHCP and Auto IP are
enabled, DHCP takes precedence.
Changing network details may require a browser refresh and in some cases (IE), a
close and reopen. If accessing via IP address rather than host name, an address bar
change may be required to reconnect.
HTTP Port
Configures the port which the webserver listens on. This can be set to port 80, or a
number between 1024 and 65535. The unit must be restarted for this setting to take
effect.
Password
It is possible to setup password access to the unit’s webserver.To add a password,
simply enter a new password in the New Password entry box and re-type it in the
Retype Password entry box. The password should be between 4 and 8 characters in
length and contain only letters and numbers.
After submission, the user will be required to enter this password to gain access to
the device. The password can be removed by clearing both entry boxes and clicking
Submit. The username is always admin.
mDNS (Bonjour)
Enabling mDNS allows the unit to be discovered using the Sonifex Service Discovery
application. If this isn’t required then it is recommended to disable mDNS to reduce
the network traffic going to the unit. The unit must be restarted for this setting to
take effect.
Содержание AVN-GMC
Страница 30: ...Notes...
Страница 31: ...Notes...
Страница 32: ...www sonifex co uk t 44 0 1933 650 700 f 44 0 1933 650 726 sales sonifex co uk...