background image

Page 4   SonicWALL SSL-IA/SSL-R Hardware Guide

Part # 232-000116-00 Rev. A

 12/00

SonicWALL, Inc.
1160 Bordeaux Drive
Sunnyvale, CA  94089-1209
Tel: 408-745-9600
Fax: 408-745-9300
E-mail: [email protected]
Web: http://www.sonicwall.com

©2000 SonicWALL, Inc. All rights reserved.

Under the copyright laws, this manual or the software described
within, may not be copied, in whole or in part, without the written
consent of the manufacturer, expect in the normal use of the soft-
ware to make a backup copy. The same proprietary and copyright
notices must be affixed to any permitted copies as were affixed to
the original. This exception does not allow copies to be made for
others, whether or not sold, but all of the material purchased (with
all backup copies) may be sold, given, or loaned to another per-
son. Under the law, copying includes translating into another
language or format.

This product includes cryptographic software written by Eric A.
Young. This product includes software written by Tim J. Hudson.

SonicWALL is a registered trademark. All trademarks and trade
names belong to their respective holders.

Specifications in this manual are subject to change without notice.

4. To disconnect a cable, press the small tab on the connector

and gently pull the connector from the jack. If the connector
does not disengage, press the tab down more firmly and pull
again.

Note:

 You must connect the cables to the SSL appliance so client

requests (inbound) and server traffic (outbound) move through dif-
ferent ports. Inbound traffic uses the “Network” port. Outbound
traffic uses the “Server” port. The configuration computer must be
connected via the “Server” port. This is discussed further in the
SSL-IA/SSL-R User Guide

.

Отзывы: