SonicWALL SonicPoint NF, Руководство по началу работы

Страница: 45 / 52

Page 45 Safety and Regulatory Information for the SonicWALL SonicPoint Wireless Appliance
Safety and Regulatory Information for the
SonicWALL SonicPoint Wireless
Appliance
Mounting the SonicWALL
•
Mount in a location away from direct sunlight and sources
of heat. A maximum
ambient temperature of 104º F (40º C)
is recommended.
•
Route cables away from power lines, fluorescent lighting
fixtures, and sources of
noise such as radios, transmitters,
and broadband amplifiers
•
The included power cord is intended for use in North
America only. For European
Union (EU) customers, a power
cord is not included.
• Ensure that no water or excessive moisture can enter the
unit.
•
Allow unrestricted airflow around the unit and through the
vents on the side of the
unit. A minimum of 1 inch
(25.44mm) clearance is recommended.
•
Consideration must be given to the connection of the
equipment to the supply circuit
and the effect of over-
loading the circuits has minimal impact on overcurrent
protection and supply wiring. Appropriate consideration
of equipment nameplate ratings must be used when
addressing this concern.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intra-
building connection to other equipment. Do not connect these
ports directly to communication wiring or other wiring that exits
the building where the SonicWALL is located.
Power Supply Information
If the power supply is missing from your SonicWALL product
package, please contact SonicWALL Technical Support at 408-
752-7819 for a replacement. This product should only be used
with a UL listed power supply marked “Class 2” or “LPS”, with an
output rated 48 VDC, minimum 0.35 A.
Regulatory Model/Type Product Names
APL21-069 SonicPoint NF
SonicPoint-N Dual-Band