SonicWALL SMA 7200, Руководство по началу работы

Страница: 19 / 59

SonicWall Secure Mobile Access 6200/7200 Getting Started Guide
19
About Installation and
Deployment
This section outlines the process of installing, configuring, and
testing the appliance, and then deploying it in a production
environment. The Installation and Deployment Process table
provides an overview of the steps.
Installation and Deployment Process
Installation Step Description
Make a note of your
appliance serial
number and
authentication code.
You’ll need this information when you
register your product on
MySonicWall. The serial number and
authentication code are printed on
your appliance label; they are also
displayed on the General Settings
page in AMC.
Rack ‐ mount the
appliance and
connect the cables.
See Rack Mounting the Appliance on
page 37 and Connecting the
Appliance on page 22 .
Turn on the appliance
and begin
configuration.
To connect to your appliance on your
internal network you must specify an
internal IP address and the subnet
mask. Use the controls on the front of
the appliance. See Entering Network
Settings Using the LCD on page 23 .
Run Setup Wizard. The wizard guides you through the
process of initial setup for your SMA
appliance. See Running the Setup
Wizard on page 23 .
Register your
appliance on
MySonicWall.
Register your appliance on
MySonicWall. Product registration
gives you access to essential
resources, such as your license file
and updates. To register, you need
both the serial number for your
appliance and its authentication
code.
Installation and Deployment Process
Installation Step Description