manualshive.com logo in svg

SonicWALL NSA E6500, Руководство по началу работы

Поделиться
Скачать
SonicWALL NSA E6500 Скачать руководство пользователя страница 12

SonicWALL NSA E6500 Getting Started Guide  

Page 11

Configuration Options

This option allows you to configure network port settings for the 
appliance. Once selected, the LCD displays a list of 
configurable options. Status options available include:

•

X0 IP and subnet

•

X1 Mode

•

X1 IP and subnet

•

X1 Gateway

•

X1 DNS settings (3 available)

•

Restore defaults

The 

X1 Mode

 can be set to 

Static

 (default option) or to 

DHCP

. If 

DHCP

 is selected, manual configuration options are not shown 

for X1 IP, subnet, gateway and DNS.

The 

Restore Defaults

 option will reset the appliance to default 

factory settings. If selected it will prompt for confirmation twice 
before restoring defaults. 

If an option is selected but not modified, the appliance will 
display a message stating that no changes were made and will 
return the user to the edit value screen. If a change was made, 
it will prompt the user for confirmation before effecting the 
change.

Restart

This option allows you to safely restart without resorting to 
power cycling the appliance. Once selected, the LCD will 
display a confirmation prompt. Select 

Y

 for yes and press the 

Right

 button to confirm. The appliance will reboot.

SafeMode

This option will set the appliance to SafeMode. Once selected, 
the LCD will display a confirmation prompt. Select 

Y

 for yes and 

press the 

Right

 button to confirm. The appliance will change to 

SafeMode. Once SafeMode is enabled, the SonicWALL NSA 
E6500 must be controlled from the Web management interface.

Screen-Saver

If no button is pressed for over 60 seconds, or if the 

Left

 button 

is pressed from the Main Menu, the appliance will enter Screen-
Saver mode. In this mode, the Status List will cycle, displaying 
every entry for a few seconds. 

If the 

Up

 or 

Down

 button is pressed while in Screen-Saver 

mode, the appliance will display the adjacent status entry.

To exit Screen-Saver mode, press the 

Right

 button.

NSA_E6500_GSG.book  Page 11  Wednesday, June 17, 2009  7:16 PM

Содержание NSA E6500















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды