SonicWALL NSA 6600, Руководство по началу работы

Страница: 22 / 63

22 SonicWall NSA 2600/3600/4600/5600/6600 Getting Started Guide
Networking Information Administrator Information
Internet Service Provider (ISP)
Information
Record the following information about your current Internet
service:
LAN IP Address: Select a static IP address for your
SonicWall NSA appliance that is within
the range of your local network. (default
for X0 is 192.168.168.168 )
Subnet Mask: Record the subnet mask for the local
network (default mask is 255.255.255.0 ).
Client devices connecting through the
appliance LAN interface are assigned IP
addresses in this network (default client
addresses assigned by the SonicOS DHCP
server are on the 192.168.168.0/24
subnet).
WAN IP Address: Select a static IP address for your
Ethernet WAN interface (X1). This setting
only applies if you are using an Internet
Service Provider (ISP) that assigns a static
IP address.
Wire Mode
Interface and
Paired Interface:
If using Wire Mode, enter the two paired
interfaces. These can be in any non ‐
wireless zone(s).
Tap Interface: If using Tap Mode, enter the interface,
and optionally the switch interface, used.
Admin Name: Select an administrator account
name. (default is admin )
Admin Password: Select an administrator password.
(default is password )
If you are
connecting
with DHCP
No information is usually required. However,
some providers may require a host name.
Host Name:
If you are
connecting
with a Static
IP address
IP Address: _____._____._____._____
Subnet Mask:_____._____._____._____
Default Gateway: _____._____._____._____
Primary DNS: _____._____._____._____
DNS 2 (optional): _____._____._____._____
DNS 3 (optional): _____._____._____._____