SonicWALL Email Security Getting Started Guide Page 19
Change the Default Administrator Password
1.
Login to the SonicWALL Email Security appliance using the IP address you entered
in “Hostname and Networking” on page 13.
2.
Navigate to the
System > Administration
page.
3.
Enter a new management password into the
Password
field.
4.
Enter it again in the
Confirm Password
field.
5.
Click
Apply Changes
.
Using Quick Configuration to Set Up Email Management
The Quick Configuration page will walk you step-by-step through the configuration of
your SonicWALL Email Security appliance. Use this window the first time you configure
SonicWALL Email Security if you are installing SonicWALL Email Security as an All-In-
One server and have only one downstream server.
The information you enter for LDAP configuration is used to authenticate users as they
log into their personal Junk Boxes.
Note:
For detailed configuration instructions, refer to the SonicWALL Email Security
Administrator’s Guide.
To use Quick Configuration:
1.
Navigate to the
System > Administration
page.
2.
Click
Click Here for Quick Configuration
.
3.
In the Quick Configuration dialog box under
Network Architecture
, enter the host
name or IP address and the port into the
Inbound destination server
fields.
The inbound destination server is the email server that will accept good email after
SonicWALL Email Security removes and quarantines junk email. For example, this
could be the IP address of a Microsoft Exchange server. The default port is 25.
