4) Function mode: SYNTH & ENV
5) ENV to VCA, VCF & ENV CV out
SYNTH
ENV
Press the
SYNTH
button
TOP Knob: WAVE/ Synth
Preset
Press the
ENV
button to change the int. VCA ENV & ENV CV out.
TOP Knob:
Attack time
in milli-seconds/seconds
If VCF is on (see #5) then ENV will go to VCF instead (VCA just gated).
BOTM Knob:
Release time
in ms/seconds.
0
10
30
50
100
200
500
800
1.5 sec 2.5 sec
inf.(int.
VCA off
0
50
100
200
300
500
700
1.2 sec 1.7 sec
2.5
3.5
GRN= unchanged
Red = changed
BOTM Knob:
Clip/Fold/Mod/
... (firm. 2 only)
- Press SYNTH again to save / Press longer than 1 sec to undo & go home.
- Auto-save & back to home screen will accure in 7 sec of inactivity.
Press ENV again to save & home/Press longer than 1 sec to undo & home.
Press ENV/FLT to save & home/Press longer than 1 sec to undo & home.
100%
10%
20%
30%
40%
50% 60%
70%
80%
90%
0%
1:2
EXP
Comp
Comp Comp
Comp
Comp
1:1
2:1
3:1
4:1
6:1
8:1
100%
10%
20%
30%
40%
50%
60%
70%
80%
90%
Mute
ENV
+
Press the
ENV
+ A-Gain
buttons to change the
TOP Knob:
Compressor/Expander
to internal VCA & CV out
BOTM Knob: Digital
Attenuator
to
int. VCA
&
CV
out
Press and
Hold all 4
func. bottons in the preamp section
longer than 1 second to
RESET
the firmware to the previ
ously loaded firmware (not including user presets).
To
Flush
the
Firmware
we need to insert a
micro-SD card containing the proper files for firmware flushing.
Power the device off and then power it on while holding the same
4 func. bottons to start in firmware flushing mode and select a
firmware from SD via the BTM KNOB: firmware 1-6
card:
Top knob: Firmware select 1-6
6) Quantizing the
FM in
& VCO mode
7) Reset / Expanding to Firm2.0 synth voice
1:2
EXP
Comp
Comp Comp
Comp
Comp
1:1
2:1
3:1
4:1
6:1
8:1
1:1
-80%
-60% -40% -20%
ENVoff
20%
40%
60%
80%
-1:1
Press the
ENV
+ FLT
button to access int. LP VCF
Press top knob to engage VCF on/off, or bottom knob to bypass attv.
TOP Knob: ENV
compressor/expander
to the int. VCF
CUTOFF
.
BOTM Knob: Digital
Attenuverter
to
VCF ENV
& ENV CV out
Press the
Q
button to access quantization
TOP Knob:
Musical scales
, press to turn Q on/off
Press both encoders down to enter
VCO, DCO
mode.
The SYNTH LED will blink red/green every 0.75 sec, and the preamp and
ENV CV out will work completely independent from the oscillator pitch
and SYNTH outputs. SYNTH out will be continously full scale.
To apply the preamp’s ENV on the internal VCA press
ENV+SYNTH
func. buttons together. Press both again to bypass the VCA.
BOTM Knob:
FM CV in ATTNV
. Press knob to bypass attnv.
- Press Q/C again to save / Press longer than 1 sec to undo & go home.
- Auto-save & back to home screen will accure in 20 sec if unchanged.
Penta.
Major
Penta.
Minor
100%
-80%
-60% -40% -20%
0%
20%
40%
60%
80%
-100%
Oct.
Semi
Minor
Oct.+5th
Major 4th+5th
ENV
FLT
+
C
Q
A-GAIN
ENV
HI Z
FLT
GATE
P SHIFT
+
-
+
-
