Sonic Pep CIC Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 24

Sonic Pep CIC Скачать руководство пользователя страница 12

12

Sonic ·

Step up with

Pep

Programming Pep

with EXPRESS

fit

Pep can be programmed using EXPRESS

fit

Fitting Software version 2012.1

or later, and may be used with the EXPRESS

link

3

, NOAHlink, or HI-PRO

programming interfaces. The ‘New Standard’ (no.2) programming

cables are required.

A fresh battery (or battery pill adapter for ITCD only)

must be inserted into a Pep hearing instrument prior to programming.

Attaching programming cables

Pep BTE hearing instruments

1 Open the battery door fully and slide the programming adapter into

the slot unit it lines up with the instrument.

2 Close the battery door (with a fresh battery included) again and

plug in the cable end into the programming socket as pictured.

Pep custom hearing instruments

1 For Pep ITCD instruments, insert the battery pill with the red indicator

pointing to the + sign and close the battery door.

2 For Pep ITC and CIC instruments insert a fresh battery. Open the battery

door slightly. With the black dot facing up, insert the end of the Flex Strip

into the space between the battery door and the hinge until the black dot

touches the faceplate. Close the battery door.

3 Place the instrument in the client’s ear and drape the strip over

and behind the ear.

Bernafon Veras IFU micro BTE

VR_ILU_DaiFMAdapterOnMicroBTE_BW_MOD_HI

VR_ILU_MicroCompactBTEprogramAdapter_BW_HI

VR_ILU_ITCDinsertPill1_BW_HI

1

2

1

2

3

125240_Pep_Fitting_Guide_US.indd 12

07.06.12 09:16

«
...
10
11
12
13
14
...
»

Содержание Pep CIC

























Отзывы:

Нет отзывов