Sonic KCS-5885Z, Руководство по эксплуатации

Страница: 42 / 114

5-8
5. 4. Preset Function Operation
5. 4. 1. Range
The range of the horizontal screen display can be changed.
5. 4. 2. Gain
The gain of the horizontal screen display can be changed.
5. 4. 3. Tilt
The tilt of the horizontal screen display can be changed.
5. 4. 4. Range HS
The range of the horizontal dual sub screen display can be changed.
5. 4. 5. Gain HS
The gain of the horizontal dual sub screen display can be changed.
5. 4. 6. Tilt HS
The tilt of the horizontal dual sub screen display can be changed.
5. 4. 7. Range V
The range of the vertical screen can be changed. This range is applied to both Vertical 1
and Vertical 2.
5. 4. 8. Gain V
The gain of the vertical screen can be changed. This gain is applied to both Vertical 1 and
Vertical 2.
5. 4. 9. Wake Mark Erase
This function is used to erase the wake displayed on the sonar screen. After this Wake
Mark Erase is executed, the wake display will return to the state of the sonar startup, and
the wake display cannot be displayed again. Therefore, be careful when this function is
executed.
< Operation procedure > (using this function after it is registered to the two touch
key of the controller)
(a)
Register “ Wake Mark Erase” to any one of the preset keys from
to .
(For details, refer to Section 5. 2. 1.)
(b) Press the preset key in which
“ Wake Mark Erase” is registered to erase the wake.