VENTILATION
Your SFS-40 amplifier must be placed on a flat hard surface to allow proper air flow through the ven-
tilation slots in the bottom panel. Failure to do so may result in overheating of electronic compo-
nents inside the unit and possible damage to your amplifier.
PACKING MATERIAL
We recommend that you retain all of the packing material and shipping boxes for your SFS-40
amplifier. They are custom designed to prevent shipping damage from occurring. SONIC FRON-
TIERS INC. will accept no responsibility for any damage occurring to amplifiers that are shipped in
packing material other than the original SONIC FRONTIERS INC. packing material.
SAFETY INSTRUCTIONS
1. WATER AND MOISTURE - This product should not be used near water. Do not expose this
product to rain or moisture to prevent fire or shock hazard.
2. HEAT - This product should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances which produce heat.
3. POWER SOURCES - This product should be connected to an AC power source of the same
rated voltage. The original shipping containers will stipulate the AC voltage this unit can operate
on.
4. CLEANING - see previous section in this manual.
5. SERVICING - Do not open this product. NO USER SERVICEABLE PARTS INSIDE. Refer
servicing to qualified service technician.
6. NON-USE PERIODS - The power cord of this product should be unplugged from the outlet
when left unused for an extended period of time.
DISCLAIMER OF LIABILITY
Under no circumstances does SONIC FRONTIERS INC. assume liability or responsibility for injury
or damages sustained in the use or operation of this equipment or for damages to any other equip-
ment connect to it.
SONIC FRONTIERS INC. reserves the right to make design changes or improvements without the
obligation to revise prior versions. All specifications are subject to change without notice.
