CREAMLINER’S FRONT PANEL CONTROLS:
1
Line select tactile switch. Selects between stereo line input pairs 1 and 2. Corresponding LED lights. This is useful in a live setting to
switch between 2 consoles, one in operation and the other in preparation. Always plug the first line signal into Line 1.
2
Bypass tactile switch. If engaged, red LED will be on. With power off, the unit will automatically go into hardware bypass and select
line 1.
3
and
4
Trimpots used to adjust the level of fat and air boost. See
9
and
10
5
Trimpot used to adjust the output level in Pentode mode to be equal to the level in Triode mode. Adjust after changing tubes.
6
Bi-color LED (green/red) signal presence/overload indicator. Red indicates clipping distortion. It means that you are driving the
Creamliner way too hot. Back off a little unless you want that kind of tone.
7
Output level. Does not affect tube gain or overload level, just determines how hard the output buffer, transformer, and ultimately the
