Instructions for the SS100BT and SS125BT
Android Instructions:
Before using the SS125BT for the first time the shaker needs to be fully charged.
To use the SS100BT, simply plug into an electrical outlet.
Indicator LEDs – SS125BT only:
When connected by USB:
Solid Green = Full charge
Solid Red = Charging
When battery-powered:
Blinking Green = Battery ok
Blinking Red = Battery low
Configuring your SS100BT / SS125BT (Sonic Bomb) App
1.
Open the app and go through the automatic steps allowing the app to use the appropriate
permissions.
2.
Check to make sure your phone is set to allow notifications including your “lock screen”
notifications in settings.
3.
SS100BT: Plug the shaker in.
SS125BT: On the shaker, turn the switch to “ON”.
4.
For both, pair mode will only be active for 1 minute after step 3. Touch pair in the app to finish.
The pair process might take a few seconds.
Set up of Notifications
Choose from the notification list which events will make your SS100BT / SS125BT vibrate.
Notifications Setup (options disabled by default):
1.
Phone Calls – enable for vibrations when you receive a call.
2.
Text Messages – enable for vibrations when you receive a text.
