13
FLASH, AUDIO AND VIBRATOR ALARM
SETTINGS
Continued
Alarm1 – Setting Vibrator Alarm Options
1. Press
Set Up
button and the word
LINK
will be shown on
the display.
2. Press the
Tone
button and the word
CLOCK
will be shown
on the display, press
Enter
.
3. Press the
Tone
button until the word
ALARM1
is shown on
the display.
4. Press the
Enter
button and the word
FLASH
will be shown
on the display.
5. Press the
Tone
button until the word
VIBR
is shown on the
display, press
Ente
r.
6. Press the
Tone
button to toggle between
ON
or
OFF
, press
Enter
on your selection.
7. While in the Set Up mode, the alarm indicators on the right
side will light up showing the alert options chosen (sound,
flash, and vib).
Alarm2 – Setting Alarm Options
Follow the same steps above when setting
ALARM2
.
Test Mode (Testing Flash, Audio, Vibrator and Lamp)
1. Press
Enter
and
Back
buttons together, the word
TEST
will
be shown on the display. The audio, vibrator, strobe and
lamp flash will be activated, so you will be assured that all
three alerts are working.
2. Press and hold the
SNOOZE
button for 2 seconds to
complete test mode.
