Directions for Model DB100T
WIRELESS doorbell & Intercom Sensor
SONIC ALERT’S 5 YEAR LIMITED WARRANTY
The Wireless doorbell & Intercom Sensors Model DB100T are warranted
against manufacturing defects in materials and workmanship for five(5)
years from the date of purchase. Within this period Sonic Alert will repair
or replace at our option the DB100T without charge for parts and labor.
Simply send the unit (postpaid) and a copy of your sales slip as proof of
purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
Operation
DB100T Sensor
Model DB100T Sensor is designed to work with models
DB100 & DB200 wireless signalers. The DB100T Sensor
has been designed for use with most intercom systems and
to extend a doorbell button for up to 3 additional doors.
Other features include selectable number of flashes (5 or
10), different flash code for front door, rear door, or
intercom.
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the
party responsible for compliance could void user’s authority to operate the
equipment
Figure 1
Diagram 1
Setting The Function Switch:
Located on back of sensor, must be set to position 1 or 2 as
shown below. (see diagram 2 below)
1) Top position
-Intercom/Buzzer
System.
2) Center
- Doorbell Button only see
diagram 2 below.
Bottom
– Does not apply to add on sensors
Intercom installation
See diagram 1 above and diagram 2 below
1) For intercom installation, attach sensor over
speaker of intercom with provided velcro. Speaker
icon on back of sensor must be centered over the
speaker of your intercom for best operation. (See
diagram 2 below).
2) Set function switch in top position.
3) Make sure 9 volt battery is installed.
Doorbell installation see reverse side
Diagram 2
Sensor icon
Dipswitches
Intercom/Buzzer System
Doorbell button only
Existing Doorbell System
Battery Cover
9 volt battery
