manual
ml:mio
9
RX / TX button
RX / TX swapping
RX/TX swapping
When using CAT cables to establish a bidirectional MADI
connection, the two MADI streams are using two of the four
twisted pairs available. As there are two possible pinouts for the
RX/TX pairs, the ml:mio offers RX/TX pair swapping to support
both configurations.
To swap the sending and the receiving twisted pair, press the
RX/TX button until the LEDs start blinking slowly. Afterwards the
routing LED changes its position.
ml:mio is connected to a
peripheral device
ml:mio is connected to a
mixing desk
If the ml:mio is connected to a peripheral device, the color of
the upper LED will tell you the vendor mode and the input sig-
nal status. The lower LED the current TP output routing.
If the ml:mio is connected to a mixing desk, the upper LED tells
you the current TP output routing and the lower LED the vendor
mode and input signal status.
The ml:mio will of course remember the last RX/TX pairing and
vendor mode in case of power loss.
